Ivan STI's Profile
Write a PM to Ivan STI
Statistics
Member Since: 22 May 2007Last Seen: 22 May 2007
10 Uploads Total
56 Comments By Ivan STI
Latest Uploads
Bookmarks
No Bookmarks Yet..
Ivan STIs latest comments
41-45 out of 56 comments
09 Feb 2008 comment on Salomon ST-Ten With USD Throne Soulplates
Jamo: I used some reference pics from rollernews.com but the rest is common sense. You have to trim A LOT, from both the boot and the inside of the plates. I found that using a dremel was the fastest and most precise option. The bottom of the skate has to be completely flat/flush and the sides where th BS groove reside also has to be havily trimmed. As you keep trimming the souls will pretty much lock into place, they are held on by the two frame bolts along with four extra bolts attached via the stock boot screws and nuts.
Jamo: I used some reference pics from rollernews.com but the rest is common sense. You have to trim A LOT, from both the boot and the inside of the plates. I found that using a dremel was the fastest and most precise option. The bottom of the skate has to be completely flat/flush and the sides where th BS groove reside also has to be havily trimmed. As you keep trimming the souls will pretty much lock into place, they are held on by the two frame bolts along with four extra bolts attached via the stock boot screws and nuts.
how did you dye them with a sharpie??